AMI MUCPPL205RFCEB Mounted Units & Inserts

d:80.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Static Radial Load Rating Co:125000 N; D:200.0000 mm; Sealed Speed Rating n3:2300 rpm; Basic Dynamic Radial Load Rating C:163000 N; B:48.00 mm; Fillet Radius ra:2.50 mm; Accessories:Shield & Seal; Oil Speed Rating Open/Shielded n2:400

Basic Dynamic Radial Load Rating C:153000 N; Sealed Speed Rating n3:2500 rpm; Fillet Radius ra:2.50 mm; Accessories:One Shield & Snap-Ri; B:45.00 mm; Oil Speed Rating Open/Shielded n2:4300 rpm; D:190.0000 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Static Radial Load Rating Co:114000 N;

Oil Speed Rating n2:7500 rpm; Accessories:One Shield; D:80.0000 mm; Basic Dynamic Radial Load Rating C:49400 N; Basic Static Radial Load Rating Co:34500 N; Grease Speed Rating n1:5600 rpm; B:38.10 mm; d:35.000 mm; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.50 mm;

r, r1,2 min.:1.1 mm; Mass inner ring:0.66 kg; B:35 mm; F:110 mm; d:95 mm;

Oil Speed Rating n2:6700 rpm; B:30.20 mm; Sealed Speed Rating n3:5000 rpm; Basic Dynamic Radial Load Rating C:48800 N; d:45.000 mm; D:85.0000 mm; Grease Speed Rating n1:5000 rpm; Accessories:No Shield, no Seal,; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:39000 N;

Width A:1.8906 in; Insert Bearing IB:Stainless Steel; Weight W:1.98 lb; Dimension N1:0.5469 in; Dimension H1:1.9375 in; Basic Dynamic Radial Load Rating:5550 lbf; Height H:3.9063 in; Distance JMAX:5.6250 in; Basic Static Radial Load Rating Co:4270 lbf; Shaft Diameter D:1 1/2 in;

C:139.7 mm; Calculation factor e:0.33; Mass bearing:86.5 kg; D1 ≈:400 mm; D:422.275 mm; a:158 mm; Basic static load rating C0:4050 kN; d1 ≈:331 mm; Fatigue load limit Pu:355 kN; r1,2 min.:6.8 mm;

Taconite seal:TER 24; PG:1/8 NPT; ba:26.988 mm; da:49.212 mm; Da:100 mm; Bearing:22211 EK; A1:69.85 mm; Stabilizing ring:SR-11-0; Housing:SAF 511; A2:171.45 mm;

Fillet Radius rb:0.60 mm; d:65.000 mm; Grease Speed Rating n1:0 rpm; Oil Speed Rating n2:7000 rpm; Basic Dynamic Radial Load Rating C:31200 N; Basic Static Radial Load Rating Co:29000 N; B:18.00 mm; Fillet Radius ra:1.00 mm; D:100.0000 mm;

Material constant KM:330; h:225 mm; Basic static load rating C0:360 kN; d2 max.:137 mm; d:60 mm; l2 max.:296 mm; G:M 60x4; l7 min.:73 mm; r1 min.:1 mm; α:6 °;

Q120°:5800 kN; A:455 mm; L:1170 mm; Eye bolt, size:2 x M 42; J1:260 mm; s:35 mm; N4 max.:35 mm; Oil level, max.:129 mm; bc:243.5 mm; ba min.:207 mm;

ra max.:0.3 mm; Reference speed:12000 r/min; r1,2 min.:0.3 mm; D:45 mm; C:13 mm; Fatigue load limit Pu:3.25 kN; Basic dynamic load rating C:15.4 kN; da:39.4 mm; E:40 mm; Da:40.5 mm;

d1 ≈:1160 mm; Calculation factor e:0.33; B:950 mm; Comparative axial load rating CFa:1480 kN; Calculation factor Y1:2; Calculation factor Y2:3; Mass bearing:4450 kg; Basic dynamic load rating C:33600 kN; Design variant/feature:TQO.1/GWI; Thrust factor K:1.76;

B:308 mm; Da max.:1392 mm; Ca min.:8.5 mm; D:1420 mm; Misalignment factor k1:0; Reference speed:260 r/min; da min.:1028 mm; Fatigue load limit Pu:1700 kN; Da min.:1260 mm; r1,2 min.:7.5 mm;

Da:419.999 mm; Cap bolt:4 x 1 1/2-6 UNC; Bearing:22340 CCK/W33; A2:315.119 mm; J max.:749.3 mm; J1:139.7 mm; L:869.95 mm; Housing:SAF 640; Stabilizing ring:SR-0-40; RG:1 NPT;